Prepare :
If everything is ready, let’s start now
Special boot modes
- Recovery : With the device powered down, hold the Volume Down and Power buttons.
- Bootloader : With the device powered down, hold the Volume UP and Power buttons.
Unlocking the bootloader YU Yutopia (“sambar”)
- Make sure your computer has working fastboot and adb.
- Enable USB debugging on the device and Enable OEM unlock in the Developer options settings on the device. (Note: Not all devices have this setting, so continue with next step if yours does not.). at your phone, Open Settings->About phone and tapping Build number 7 times or until you “become a developer”. Then you will need to go back to Settings->Developer options and enable USB debugging. Or Install and Open DeveloperOptions.apk to easy access to developer options settings.
- Connect your Phone to PC
- Open AdbFastbootTool Folder, than Press “SHIFT+RIGHT CLICK” and open command prompt “CMD terminal”
- From a terminal on a computer, type the following to boot the device into fastboot mode :
adb reboot bootloader [ENTER]
- You at Fastboot mode now, once the device is in fastboot mode, verify your PC sees the device by typing
fastboot devices
- If you don’t see your device serial number, and instead see “<waiting for device>”, fastboot is not configured properly on your machine.
- If you see “no permissions fastboot”, try running fastboot as root
From the same terminal, type the following command to unlock the bootloader:fastboot -i 0x2A96 oem unlock [ENTER]
if can’t work, change command with
fastboot -i 0x2c3f oem unlock [ENTER]
- If the device doesn’t automatically reboot, reboot it from the menu. It should now be unlocked. Since the device resets completely, you will need to re-enable USB debugging on the device to continue.
- Your YU Yutopia was unlocked now, happy modding 🙂
Discussion
No comments yet.